Skip to content
Contact & quote
EN
Downwind sails

Code & gennaker

Description

  • The Code 0 is an essential sail for offshore racing on boats whose headsails do not overlap. It comes into its own when the eased and barber-hauled jib can no longer make the boat accelerate; the critical apparent wind angle (AWA) is between 40 and 45°.
  • Some restrictive rating rules, such as IRC or ORC, require a mid-girth greater than 75% of the foot; the sail is then considered an asymmetric spinnaker.
  • Depending on the size of the boat, it can be made either from woven Nylon or Polyester like spinnakers, or from light laminates with Polyester, Aramid or Dyneema fibres.
  • Depending on the sail area and the luff length, the Code 0 can be fitted with a textile anti-torsion cable so that it can be hoisted and dropped furled.
  • Designed with the Sail-Pack software.
  • Robotic cutting on a Zund table guarantees precision.
  • Panel seams are either glued, or glued and triple-stitched with a thread specially treated to resist UV.
  • Section seams are glued and stitched.
  • Reinforcements are radial, with a double ply for boats over 40 feet.
  • The available cuts are 4R-Cut, 5R-Cut and 6R-Cut. The choice of cut depends on the size of the sail and/or its radial aspect.

Included

  • Red luff tape, reinforced with a Dyneema line
  • Green leech tape
  • White foot tape
  • Webbed stainless steel rings at all 3 corners
  • Leech and foot lines
  • Luff ribbons
  • Deck bag

Options

  • Anti-torsion luff cable with thimbles suited to the furler
  • Trim marks on the luff
  • Integrated clew strop
  • Retriever line
  • Sail numbers and national letters
  • Launching sock
  • Spinnaker sock
  • Rating certificate